To charge your ePod 2+ vaping device, place the device into the magnetic USB charging cable supplied with your Vuse ePod 2+ kit; should you require a new charging cable, they're also available for individual purchase. The magnet will pull the device into place. Connect the other end of the USB charging cable to a USB charging port or station.
When charging, the LED will flash red until 10% charged, then light solid red until 80% charged and lastly solid green until the device is fully charged.When the LED turns off, the ePod 2+ is fully charged and the magnetic USB charging cable should be disconnected. It should take no longer than 50 minutes to fully charge your Vuse ePod 2+ device.
To avoid the risk of fire, injury and/or damage to your Vuse ePod 2+ or other property, only charge your Vuse ePod 2+ with the equipment provided in your ePod 2 vape kit. Note that you cannot use the ePod charging cable to charge your Vuse ePod 2+ device. We also recommend that you never leave your device unattended while it is charging.
On the more technical side, rating input of magnetic USB charging cable: 5VDC, 1.5A. This product should only be connected to a safety extra-low voltage (SELV) circuit rated at 5VDC, 1.3A. Using an AC adaptor with a current output lower than this will result in a slower charge time.